Nitrobenzene 20% Emulsifier

• Effective use

• Accurate composition

• Longer shelf life

• Precisely formulated

APPLICATION:

SUDASOL TQM is a single component formulation for preparing Nitrobenzene 20% emulsion in water.

DOSAGE:

0.7-1%.

PROCESS (for 100Kg emulsion):

    Take 20 kg. Nitrobenzene.

    Add 78.5-79 Kg D.M. / R.O.water.

    Start stirring.

    Add 1-1.5 Kg SUDASOL TQM very slowly under continuous stirring.

    Stir further for 15-30 minutes till full viscosity is achieved.

NOTE: the effective cost of SUDASOL TQM will be Rs.3.70 to Rs.5.50. to prepare 1Kg of 20% Nitrobenzene emulsion.

PACKING: 50Kg HDPE Jerry cane.

NOTE:

1. There may be slight separation in Sudasol TQM.Hence please mix it well to make it homogeneous before use.

2. The dose of Sudasol TQM is to be adjusted as per the viscosity of the emulsion required. Normally a dose of just 1% of Sudasol TQM (1 kg. Sudasol TQM / 100 kg emulsion) is sufficient.

SUDASOL TQM

APPLICATION:

SUDASOL TQM is a single component formulation for preparing Nitrobenzene 20% emulsion in water.

DOSAGE:

0.7-1%.

PROCESS (for 100Kg emulsion):

    Take 20 kg. Nitrobenzene.

    Add 78.5-79 Kg D.M. / R.O.water.

    Start stirring.

    Add 1-1.5 Kg SUDASOL TQM very slowly under continuous stirring.

    Stir further for 15-30 minutes till full viscosity is achieved.

NOTE: the effective cost of SUDASOL TQM will be Rs.3.70 to Rs.5.50. to prepare 1Kg of 20% Nitrobenzene emulsion.

PACKING: 50Kg HDPE Jerry cane.